DX

The DX system is a proven and reliable power chair control system that meets a whde range of user's needs and applications.

Key Features

• Modular expandable design
• High performance drive control
• Wide range of input and control devices
• Simple connectivity of modules using DX BUS cable
• Easy system configuration and programming using Dynamic Controls Wizard or Hand Held Programmer

The master remote is the “brains” of the DX system and every DX power chair must have one. Every master remote has an On/Off switch, a programming socket and a DX status indicator. They may also be used to control seat positioning, lighting, and environment controls.

DX-REMG90

High-end joystick remote easily operated by a wide variety of users.

• 5 different drive profiles
• 7 segment LED display and battery gauge
• Proportional, 4-quadrant or 3-quadrant control
• Access to actuator and environmental controls
• Supports latched actuator and simultaneous actuator operation
• Optional jack sockets or toggle switches for on/off and mode control

Part Numbers

• DX-REMG90 Master Remote

• DX-REMG90A Master Remote with jack sockets

• DX-REMG90T Master Remote with toggle switches

DX-REMG91 Display/DX-REMG91S Scanner Display

• High-end display remote ideal for specialty control inputs.

• 5 different easily selectable drive profiles

• 7 segment LED display and battery gauge Support for proportional joysticks or switched inputs with 3 or 4 quadrant control

• Access to actuator and environmental controls

• Latched actuator operation

• Three jack sockets or toggle switches for on/off and mode control

• Single switch control through scanning mode (G91S)

Part Numbers

• DX-REMG91 Display Master Remote

• DX-REMG91S Display Master Remote with scanner

• DX-GNK-KIT2 Gooseneck Mounting Kit for DX-REMG91 and DX-REMG91S

DX-REM34B Master Remote

A simple joystick remote that can be easily operated by a wide variety of users.

• 5 different drive profiles

• 12 button keypad with icon based buttons

• Dedicated buttons for actuator selection and lighting (requires relevant DX modules)

• 7 segment LED display
• Horn, battery gauge and magnetic key lock

Part Numbers

• DX-REM34B Master Remote

• also required – DX BUS cable

DX-REM41D Master Remote

Joystick controlled remote suitable for tray mounting.

• 5 different drive profiles

• 12 button keypad with icon based buttons

• Dedicated buttons for actuator selection and lighting (requires relevant DX modules)

• 7 segment LED display

• Horn, battery gauge and magnetic key lock

Part Numbers

• DX-REM41D Tray Master Remote
• also required – DX BUS cable

DX-ACU3B Master Attendant Remote

A joystick remote that can be operated by an attendant or carer.

• 5 different drive profiles

• 7 segment LED display

• Icon-based buttons, battery gauge and magnetic key lock

• Push bar or hand grip mounting
• On/Off button, battery gauge, and charger
• socket easily reached by the attendant

Part Numbers

• DX-ACU3B Master Attendant Control
• also required – DX BUS cable

DX-CLAMB Combined Lighting and Actuator Module

---

Single module providing both lighting and seat actuator functions from a single module.

• Actuator control of up to five separate seat actuators
• Independent current level trips for each actuator
• 3 channel lighting support for indicators, hazard lights, driving lights
• No direct battery connections required, all power sourced via the DX BUS
• External switch inputs can be programmed to slow or stop chair driving if activated

Part Numbers

• DX-CLAMB Combined Lighting and Actuator Module

also required – DX BUS cable, DXLOOM-AUX Connector Kit

DX-LM-Z Lighting Module

Provides all of a wheelchair’s lighting requirements.

• 3 channel lighting support for indicators, hazard lights, driving lights

• No direct battery connections, all power sourced via the DX BUS
• Short and open circuit detection for lamps

Part Numbers

• DX-LM-Z Lighting Module

DX-ARC5 Actuator Remote Control

• Separate hand-held remote control for actuators.
• Simple operation
• Controls up to 5 actuators
• Can be used with DX or DX2 actuator modules
• Programmable options to allow seat position to be adjusted while driving

Part Numbers

• DX-ARC5 Actuator Remote Control Module

Please note an actuator module is also required.

DX-ARC-SWB Actuator Remote Control Switch Box

Control of up to 5 seat positioning actuators using
switches connected to a 15 pin D-type connector.

• Alternative for users who have difficulty using actuator controls
• Remote control for actuators using a choice of external switches (customer supplied)
• Simple operation
• Can be used with DX or DX2 actuator modules
• Switched 24V, 1A auxiliary power supply output

Please note that this unit cannot be used at the same time
as a DX-ARC5.

Part Numbers

• DX-ARC-SWB Actuator Remote Control Switch Box

The DX power modules provide excellent response and driving control in all terrain and are available to suit all mid, rear and front wheel drive configurations.

PMB2-S

• Dynamic Controls load compensation algorithm
• Fully programmable to suit all DC motor power chairs
• Advanced safety and protection features
• Compact, rugged enclosure sealed against dust and water
• 2 DX BUS connectors for easy system expansion
• Visible “flash code” diagnostics

Part Numbers

• DX-PMB2-S DX Servo Power Module (160A Single Channel)

also required – DXLOOM-PM Connector Kit

DX-SLM Servo Lighting Module

Servo steering module for use on wheelchairs that have a separate motor for servo control of steering Castors.

• Control of steering servo with potentiometer steering feedback

• Provision of lighting outputs
• Range of programming options to give optimum performance on any servo steered wheelchair

Part Numbers

• DX-SLM Servo Lighting Module

also required – DX BUS cable, DXLOOM-SLM,  DXLOOM-PM Connector Kit, DX-PMB2 or DX-PMB2-S

In addition to a Master Remote any DX system can also have a Secondary Remote installed. This enables the user to have a wider choice of input or specialised rehab controls.

DX-ACU1 Attendant Dual Control

---

Joystick remote that enables an attendant to drive the chair instead of the user. The attendant dual control unit may be used in addition to a secondary remote and master remote all on the same system.

• Switchable control between Attendant and User
• Independent speed control

Part Numbers

• DX-ACU1 Attendant Dual Control

also required – DX BUS cable

DX-RJM Remote Joystick Module

Standard proportional joystick for mounting in a range of positions, e.g. chin control, mid line.

Part Numbers

• DX-RJM Remote Joystick Module

DX-RJM-HD Heavy Duty Joystick

---

Heavy duty switched joystick remote for users who might damage a standard joystick through rough handling.

• Designed for robustness using heavyduty switches
• 8 driving directions

Part Numbers

• DX-RJM-HD Heavy Duty Switch Joystick

also required – DX BUS cable

DX-RJM-MINI Mini Joystick

Very low force proportional joystick secondary remote offering comparable performance to a conventional joystick.

• Sealed unit, suitable for tongue, finger, thumb, hand, chin control
• Light touch, low deflection operation(<10 grams)
• Fully proportional control
• Ergonomic shape ideal for thumb control
• Fully sealed unit

Part Numbers

• DX-RJM-MINI Mini Joystick

Includes a mounting kit, alternative cork ball knob and interface box for connection to the power module. Requires switch for drive profile.

DX-RJM-VIC-CCD Finger Steering Control

Non contact proportional finger control for use by users with limited finger strength.

• Designed for finger control with zero force required
• Full proportional control with no physical contact
• Any angle mounting

Please note addtional protection is required if driving outdoors in wet conditions.

Part Numbers

• DX-RJM-VIC-CCD Finger Steering Control

DX-ACC4B Switch Interface

Input module for up to 5 switches.

• 9 pin D-type connector
• Ideal for use with 3-quadrant and 4-quadrant switched head controls
• Simple driving interface with up to 8 driving directions
• Provides power to active switch controls

Part Numbers

• DX-ACC4B Switch Interface

also required – DX BUS cable, switches

DX-SNP Sip and Puff Interface

Sip and Puff control that can be fine tuned to suit any user or application.

• Fully programmable sip and puff pressures
• 7 standard drive programs
• Latched driving (step or progressive step) with optimised safety through programmable emergency stop and latched time options
• Easy custom programming using DX Hand Held Programmer
• Optimum safety through programmable Emergency Stop and Latch Time options
• Mode Control feature

Part Numbers

• DX-SNP Sip and Puff Module

also required

• DX BUS cable
• GSM9977 Sip and Puff Mounting Kit
• GSM9942 SNP Filter
• SW932662 Set of 10 straws
• SWTA5100 SNP breath operated mode switch

GSM9977 Sip & Puff Mounting Kit

---

A complete set of parts required to operate the Sip and Puff module. Contains:

• 21 inch gooseneck
• Air Tube Straws x 2
• Tubing x 1m
• Wheelchair clamp
• Saliva trap

Part Numbers

• GSM9977 Sip and Puff Mounting Kit

DX-ECU Environmental Control Unit

---

Environmental control of up to 8 switched outputs using the same user input device as used for driving.

• Interface to on-chair devices such as laptopn computers or communication aids
• Independent control of up to 8 separate functions or devices per DX-ECU
• “Mouse mode” for operating a computer mouse mover
• Up to 2 ECUs can be operated in a single DX system
• Can be used with DX or DX2 master remotes that support ECU

Part Numbers

• DX-ECU Environmental Control Unit

also required – DX BUS cable

Please note a Master Remote that supports ECU functionality
is required.

DX-ACC3 Charger Socket Module

---

Provides separate battery charging socket for 24 Volt Battery Chargers up to a maximum of 8A.

Part Numbers

• DX-ACC3 Charger Socket Module

DX-SKT-X4 DX BUS 4 Way Socket

---

Provide additional DX BUS sockets to attach extra DX modules.

Part Numbers

• DX-SKT-X4 DX BUS 4 Way Socket

also requires DX BUS cables